Approved Vendor
#1-100 Horizontal Cards for 6mm Wd 1 and 2 Circuit Modular DIN-Rail Mount Terminal Block
MPN: 7641K75
- ECCN
- EAR99
- Color
- White
Loading productsApplying the selected category and filters…
Product discovery
60 matching products
Approved Vendor
MPN: 7641K75
Approved Vendor
MPN: 7641K991
Approved Vendor
MPN: 7641K77
Approved Vendor
MPN: 7641K993
Approved Vendor
MPN: 7641K992
Approved Vendor
MPN: 7641K76
Approved Vendor
MPN: 7641K78
Approved Vendor
MPN: 7641K994
Approved Vendor
MPN: 65705K72
Replace worn motor brushes on small DC motors.1 Shunt—Brushes with 1 shunt are for small motors that operate under 1 horsepower.
Approved Vendor
MPN: 60135K92
Nylon rollers and aluminum rails make these good for light duty applications. Mount along a wall or other vertical surface.
Approved Vendor
MPN: 3403K33
Also known as hubs, these adapters attach rigid stainless steel conduit to a knockout in an outlet box or enclosure. They are corrosion resistant, so you can use them in food-processing and chemical plants.
Approved Vendor
MPN: 9150T23
Use these adapters to attach choose-a-color thin-wall (EMT) steel conduit to a knockout in an outlet box or enclosure. The screw-clamp end tightens around conduit with a screw.
Approved Vendor
MPN: 9106K55
Use these adapters to attach liquid-tight flexible plastic conduit to a knockout in an outlet box or enclosure. They provide a connection that seals out liquid and resists oil, corrosion, and UV light. They are UL listed when used with abrasion-resistant liquid-tight flexible plastic conduit (Type B).The twist-in end attaches to conduit with a few quick turns.
Approved Vendor
MPN: 9106K54
Use these adapters to attach liquid-tight flexible plastic conduit to a knockout in an outlet box or enclosure. They provide a connection that seals out liquid and resists oil, corrosion, and UV light. They are UL listed when used with abrasion-resistant liquid-tight flexible plastic conduit (Type B).The twist-in end attaches to conduit with a few quick turns.
Approved Vendor
MPN: 60135K95
Nylon rollers and aluminum rails make these good for light duty applications. Mount along a wall or other vertical surface.
Approved Vendor
MPN: 9082K52
One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure. These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.Acetal fittings resist corrosion and chemicals.
Approved Vendor
MPN: 9150T22
Use these adapters to attach choose-a-color thin-wall (EMT) steel conduit to a knockout in an outlet box or enclosure. The screw-clamp end tightens around conduit with a screw.
Approved Vendor
MPN: 9106K52
Use these adapters to attach liquid-tight flexible plastic conduit to a knockout in an outlet box or enclosure. They provide a connection that seals out liquid and resists oil, corrosion, and UV light. They are UL listed when used with abrasion-resistant liquid-tight flexible plastic conduit (Type B).The twist-in end attaches to conduit with a few quick turns.
Approved Vendor
MPN: 9106K42
Use these adapters to attach liquid-tight flexible plastic conduit to a knockout in an outlet box or enclosure. They provide a connection that seals out liquid and resists oil, corrosion, and UV light. They are UL listed when used with abrasion-resistant liquid-tight flexible plastic conduit (Type B).The twist-in end attaches to conduit with a few quick turns.
Approved Vendor
MPN: 6425K314
Approved Vendor
MPN: 6425K31
Approved Vendor
MPN: 6425K321
Approved Vendor
MPN: 6425K324
Approved Vendor
MPN: 6425K322
Approved Vendor
MPN: 6425K313
Approved Vendor
MPN: 6425K312
Approved Vendor
MPN: 6425K32
Approved Vendor
MPN: 65705K51
Replace worn motor brushes on small DC motors.1 Shunt—Brushes with 1 shunt are for small motors that operate under 1 horsepower.
Approved Vendor
MPN: 9874T15
More flexible than standard wire, this wire is often used for internal appliance wiring. The strand count is the number of strands followed by the size of the individual strand. The higher the number of strands, the more flexible the wire. Also known as MTW wire, it’s rated UL 1063 for machine tool wiring.Flame rated VW-1 wire meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Approved Vendor
MPN: 6450T31
Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces. Also known as hook-up wire, it’s good for wiring electrical panels and plant floor equipment, or can be used as an alternative to building wire. It’s flame rated VW-1 to meet requirements for preventing the spread of flames, based on a timed test with vertically suspended material.
Approved Vendor
MPN: 1953K92
Approved Vendor
MPN: 3358T35
Approved Vendor
MPN: 2003K32
All bases have a square bottom, round top, and flashing to simplify installation.To Order: For slope bases, please specify pitch: 1/12-11/12 in increments of 1/12. To determine pitch, use an angle indicator or divide rise by run (see illustration). For instance, if your roof rises 5" in 12" of horizontal space, your pitch is 5/12.
Approved Vendor
MPN: 1964K32
Often used in tight spaces, such as in walls and ceilings, rectangular duct allows you to select larger sizes without increasing duct height. Duct and fittings have interconnecting ends that lock together with brackets.
Approved Vendor
MPN: 4504K115
Developed for the solar industry, these fuses meet the needs of high-voltage DC applications. They can withstand the cycling conditions and environment associated with outdoor installations. Designed for use with fuse blocks for 1,000V DC fuses.Breakthrough current, labeled on the fuse as IR, is the maximum current that a fuse can safely stop in the event of a short circuit.
Approved Vendor
MPN: 5676N15
Approved Vendor
MPN: 8260T15
Hook up speakers, intercoms, and other low-current devices to a building's communication wiring. This CL2 cable is suitable for in-wall installation in single-level facilities. The wires can be separated for installation. All cable has one wire marked for polarity, except for 0.17-in.-wide cable.
Approved Vendor
MPN: 9874T14
More flexible than standard wire, this wire is often used for internal appliance wiring. The strand count is the number of strands followed by the size of the individual strand. The higher the number of strands, the more flexible the wire. Also known as MTW wire, it’s rated UL 1063 for machine tool wiring.Flame rated VW-1 wire meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Approved Vendor
MPN: 6450T29
Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces. Also known as hook-up wire, it’s good for wiring electrical panels and plant floor equipment, or can be used as an alternative to building wire. It’s flame rated VW-1 to meet requirements for preventing the spread of flames, based on a timed test with vertically suspended material.
Approved Vendor
MPN: 5376K942
Approved Vendor
MPN: 5376K944
Approved Vendor
MPN: 5376K947
Approved Vendor
MPN: 12295A64
Approved Vendor
MPN: 2003K33
All bases have a square bottom, round top, and flashing to simplify installation.To Order: For slope bases, please specify pitch: 1/12-11/12 in increments of 1/12. To determine pitch, use an angle indicator or divide rise by run (see illustration). For instance, if your roof rises 5" in 12" of horizontal space, your pitch is 5/12.
Approved Vendor
MPN: 2246K21
Power supplies are required and can operate up to two static-eliminating bars.
Approved Vendor
MPN: 8654T15
These lights have lenses that snap in and out, so you can easily swap colors or change their position in the stack. They meet NEMA 4X for protection from corrosion and washdowns.Use the extension pipe and mounting flange to make the light taller (both sold separately).Use the vertical-mount bracket (sold separately) to mount the light to a vertical surface such as a wall.
Approved Vendor
MPN: 1953K93
Approved Vendor
MPN: 5191N115
These hoods keep your enclosure watertight, even around intake and exhaust cutouts. The silicone seal shuts out water and dust, while the slanted top lets water roll off. When used over fans or vents rated IP54 or higher, hoods meet IP56 and NEMA 4X to help protect your electronics from wet and corrosive environments, dust, and washdowns. They also meet American, Canadian, and European safety standards.Screw the mounting bracket around your fan or vent, then clip the hood on. Pop it off for cleaning, changing filters, and other maintenance.
FANUC
MPN: 7714N13
Use these cords to extend the distance between your FANUC CRX robot arm and your controller. Plug one end directly into the controller and connect the other end to the existing cord coming from the robot arm.
Approved Vendor
MPN: 5191N169
These hoods keep your enclosure watertight, even around intake and exhaust cutouts. The silicone seal shuts out water and dust, while the slanted top lets water roll off. When used over fans or vents rated IP54 or higher, hoods meet IP56 and NEMA 4X to help protect your electronics from wet and corrosive environments, dust, and washdowns. They also meet American, Canadian, and European safety standards.Screw the mounting bracket around your fan or vent, then clip the hood on. Pop it off for cleaning, changing filters, and other maintenance.
Approved Vendor
MPN: 5191N171
These hoods keep your enclosure watertight, even around intake and exhaust cutouts. The silicone seal shuts out water and dust, while the slanted top lets water roll off. When used over fans or vents rated IP54 or higher, hoods meet IP56 and NEMA 4X to help protect your electronics from wet and corrosive environments, dust, and washdowns. They also meet American, Canadian, and European safety standards.Screw the mounting bracket around your fan or vent, then clip the hood on. Pop it off for cleaning, changing filters, and other maintenance.
Approved Vendor
MPN: 9874T13
More flexible than standard wire, this wire is often used for internal appliance wiring. The strand count is the number of strands followed by the size of the individual strand. The higher the number of strands, the more flexible the wire. Also known as MTW wire, it’s rated UL 1063 for machine tool wiring.Flame rated VW-1 wire meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Approved Vendor
MPN: 6450T28
Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces. Also known as hook-up wire, it’s good for wiring electrical panels and plant floor equipment, or can be used as an alternative to building wire. It’s flame rated VW-1 to meet requirements for preventing the spread of flames, based on a timed test with vertically suspended material.
Approved Vendor
MPN: 2003K34
All bases have a square bottom, round top, and flashing to simplify installation.To Order: For slope bases, please specify pitch: 1/12-11/12 in increments of 1/12. To determine pitch, use an angle indicator or divide rise by run (see illustration). For instance, if your roof rises 5" in 12" of horizontal space, your pitch is 5/12.
Approved Vendor
MPN: 5676N14
Approved Vendor
MPN: 5191N172
These hoods keep your enclosure watertight, even around intake and exhaust cutouts. The silicone seal shuts out water and dust, while the slanted top lets water roll off. When used over fans or vents rated IP54 or higher, hoods meet IP56 and NEMA 4X to help protect your electronics from wet and corrosive environments, dust, and washdowns. They also meet American, Canadian, and European safety standards.Screw the mounting bracket around your fan or vent, then clip the hood on. Pop it off for cleaning, changing filters, and other maintenance.
Approved Vendor
MPN: 5191N173
These hoods keep your enclosure watertight, even around intake and exhaust cutouts. The silicone seal shuts out water and dust, while the slanted top lets water roll off. When used over fans or vents rated IP54 or higher, hoods meet IP56 and NEMA 4X to help protect your electronics from wet and corrosive environments, dust, and washdowns. They also meet American, Canadian, and European safety standards.Screw the mounting bracket around your fan or vent, then clip the hood on. Pop it off for cleaning, changing filters, and other maintenance.
Approved Vendor
MPN: 5191N112
These hoods keep your enclosure watertight, even around intake and exhaust cutouts. The silicone seal shuts out water and dust, while the slanted top lets water roll off. When used over fans or vents rated IP54 or higher, hoods meet IP56 and NEMA 4X to help protect your electronics from wet and corrosive environments, dust, and washdowns. They also meet American, Canadian, and European safety standards.Screw the mounting bracket around your fan or vent, then clip the hood on. Pop it off for cleaning, changing filters, and other maintenance.
FANUC
MPN: 7714N23
Made by FANUC, these cords connect your FANUC controllers and teach pendants. Use them to replace existing cords or to swap out your cords for a different length.
Approved Vendor
MPN: 9874T12
More flexible than standard wire, this wire is often used for internal appliance wiring. The strand count is the number of strands followed by the size of the individual strand. The higher the number of strands, the more flexible the wire. Also known as MTW wire, it’s rated UL 1063 for machine tool wiring.Flame rated VW-1 wire meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.